Remote Control Radio Frequency RF

Product Details:

Radio Remote controls with joystic and push buttons with LCD Screen for Cranes, Tower Cranes, Hydraulic Mahcines, Mobile Machines, and for Industrial Applications.

All RCC can be configured for cusotmer specifications.

Product Details:

L series is a high technology radio control equipment and it flexibility give a solution for every industrial application. Special functions are programmable by SOFTWARE available for customers.

Features:

• Sturdiness is guaranteed by a watertight
  and shock-resistant enclosures
• Modern design; pocket size and  
  light weight (155g)
• Extremely long battery life:
  300 hours of continuous transmission
• Programmable special functions
  
  

General features:

• Remote pairing of ID code
• Wide operating range: up to 100 m
• Purposely designed for the control of movable and industrial machineries, in the presence of high vibrations and heavy duties

Product Details:

A new era of Radio Industry, working in Multi-frequency with bi-directional transmission. JUUKO JK is the first remote control for industrial equipment that combines quality, reliability, safety and economy in one.Never been so accessible. JK Series is designed to simplify the work life of those who use it. Through the use of high technology, Juuko has significantly reduced its consumption of batteries, it works with simple alkaline batteries.Wide range of Receiver. The receivers are divided into three different types of size: H/HV - HS - HM. Which can be matched to any model of transmitter unit JK series.This allows to take full advantage of the high amount of available relay outputs.3 different sizes of receiver on 4 kind model for output characteristics, one for every need2 AA alkaline batteries for 300 hours of continuous transmissionEmergency STOP button on highly accessible, secure always on topSafety at the highest level. The transmission technology bi-directional radio allows a continuous exchange of data between transmitter and receiver, allowing a condition always optimal free working frequency and a high degree of safety.Start with an electronic key. To ensure access to use only authorized personnel without the need for keys removed, the start operation is under electronic key control that it is protected by password.

Product Details:

L12 series is a high technology radio control equipment and it flexibility give a solution for every industrial application.

Features:

• Simplicity and practicality
• Each dual-speed button activates 2 relays
• Extremely long battery life
• Designed for mobile and industrial applications
• Programmable special functions

 

Transmitter technical features:

• L x W x H: 274 x 77 x 42 mm 
• Weight: 385 g (without batteries) 
• Power supply: 2 AA-size batteries 
• Output power: <4mW
• Max. current consumption: 10mA 
• Standby current: less than 1 pA Jammed button detection
• Low battery indicator
• Start key switch and stop mushroom button

 

Receiver technical features:

• L x W x H: 253 x 267 x 150 mm 
• Weight: 3000 g (without cable)
• Power supply: 12/24 Vac/dc - 48/110/220 Vac
• Current consumption at 24 Vac/dc: 32 mA in standby mode 148 mA with start relay activated + 19 mA more for each relay Output contacts: 250Vac - 10A

Product Details:

A new remote control for the Mobile Industry:

• Saga1 V6 is the new Radio Handheld Series SAGA to manage the various applications of radio controls onself-propelled vehicles. It is in fact designed to be installed in trucks and / or equipment for the  industry where it is necessary tocontrol certain functions by radio control. 

It is used especially in the industrial sectors for the manufacture of:

• Hook
• self-rescue
• platforms
• automated platforms
• trolleys towing DC
• crawler tracks for agricultural use 

Transmitter shockproof:

• It is equipped with a rugged transmitter with a handy belt clip and a small size that easilyportability. The product works with 2 AA batteries to 1.5 VDC ensuring a long continuous transmission(button pressed) up to 150 hours.

Normal receiver and PLUS receiver:

• There are 2 differentreceivers, the standard model and the modelPLUS with additionalpush button retractablecontrol in an emergency or intandem with the transmitter. This option isespecially useful insituations of losing or failure of thetransmitter.

General Features:

• Multi frequency PLL radio with 3 systems settings: Fixed frequency, LBT, ACS frequency from 869,700 to 870,000 Mhz 
• Operating temperature -40 ° +85 ° C range up to 100 meters in open field 32 bit ID code 
• CRC error correction method with "cyclic redundancy check" 

Transmitter Specification:

• HxWxD= 112 x62 x 39 mm 
• Weight = 135 g (without batteries) 
• Power Supply 2 x AA 1.5 Vdc 
• Transmission power is adjustable in 3 levels = 1 mW- 3.2 mW- 10 mW 
• Maximum current consumption 30 mA 
• Consumption in "standby" 1.5 micro A 
• Security control buttons down power battery level LED indicator green / yellow I red 

Standard & Plus Receiver Specifications:

• HxWxD= 130 0 146,69 
• Weight = 525 g
• Power supply 10-42 Vdc 
• Consumption to 24 Vdc 24 mA in standby 50 mA for each relay activated 1 relay stop 8 control relay contact N.O. Relay contact to 16 Vdc 20 A 
• Voltage isolation 15 KV Additional keyboard IP65 with door retractable 

Product Details:

STILO series pushbutton pendant stations:

• PK type double-row
• B type single-row

Main Features:

• The STILO range of push button stations for auxiliary circuits has been designed and produced in compliance with the safety criteria specified in the Europan Rules Machinery Directive EEC 89/392. The products are the result of years of experience and are specifically designed for heavy-duty as well as normal requirements. Types PKE are most suitable for building cranes while types PKP are for bridge cranes. They are available in versions containing from 4 to 14 buttons, size and inside space tested to allow fast cabling, thus reducing time and costs.

Safety Functioning:

• The emergency stop pushbutton, has been produced in compliance with Standard EN418 and the NC safety contact elements feature guaranteed opening (CEI EN 60947-5-1). A single internal membrane, separates the upper part from the bottom which contains the electric contacts, thus protecting from infiltration of water. All materials used, are resistant to atmospheric agents, temperature changes and shocks. Actuators, are marked with international symbols. Self-cleaning sliding contact elements in silver nickel alloy.

Product Details:

Wireless data transmission:

• The M8 transmitter is designed for mounting on a DIN rail, and is the ideal solution for creating high-safety wireless link enabling the transmission of commands and status signals.
• Sensors, RS232 and RS485 ports can be inputs for a M8 transmitter becoming outputs at a MAC receiver thus providing a status or alarm signals reporting. In the same way, control panel commands can be radio transmitted to the receiver for the remote control of a machine
• Until 100 meters of operating distance
• This device should be mounted inside a control box for clean and trouble free installation, and is supplied complete with an external antenna for the radio communication.
• In addition to the 21 on/off + 4 proportional inputs, Start, Stop and Frequency Change features are available as for traditional radio control commands.
• The double transmission version can manage the feedback information displaying it on a LCD screen or activating some transmitter built in relays.
• Extractable terminal blocks with marker strips: order and simplicityA control box always kept in order, ease of access for maintenance purpose, quick installation: those are the main advantages deriving from extractable terminal block with marker strips you can find on M8 transmitter.  
• Comunication port: ready to listen
• The M8 transmitting unit supports the RS485 communication protocol that allows the data acquisition from sensors or external electronic devices.
• Extractable fuses: built in functionality
• In order to simplify installation and maintenance procedures, M550 series has designed the electronic boards of its products keeping an easy access to the protection devices.
• External antenna with SMA plug: radio communication is guaranteedM8 transmitting unit communicates with its receiver thanks to an external antenna that can be easily mounted in the most suitable position for guaranteeing a reliable radio link.

Product Details:

The Transmitters console pouch bag M550 series ZEUS represent the right compromise between completeness of controls, ergonomics and ease of use.The series ZEUS fully satisfies every requirement of controlling access through a console practical and well equipped. On / off, combined with proportional analog outputs, PWM, CANopen, bi-directional transmissions, made to specifications and special software, allow ZEUS to be used in any industry. 

Features:

• LED low battery control
• Start push button
• Extractable safety key
• Extractable battery 
• Emergency push button category 4 sil 3
• The versatility of the ZEUS series allows any kind of configuration
• Proportional optical joystick
• Push button and switches for each need

Product Details:

Features:

• 12 Pushbuttons with one(two) step(s)+A/B Toggle Switch+Rotary Key+Alarm(hom) 
• EMS Stop complied with EN-ISO 13849-1 Cat. 4 
• Relay Jammed Detector 
• Receiver built-in hom(alarm)  
• Receiver pre-wiring cable ready for installation.
• Receiver F Type antenna easy for extension. 

Product Details:

Handy overall dimension (230 x 95 x 110 mm)High versatility of command 5 steps speed joystick Practical belt bag Programmable functional logic ID remote settingHigh performance transmission Purposely designed for the control of movable and industrial machineries, in the presence of high vibrations and heavy duties L40 series is a high technology radio control equipment and it flexibility give a solution for every industrial application. The L40 series, is designed with advanced technologies and fully meets the requirements of various industries. All functions are custom-made to fit your equipments through a simple PC software. Special functions are programmable by Software available for customers. This kind of equipment, can be employed also in the lifting sector on board of cranes, hoists and travelling bridge-cranes, in pursuance of the following European.

Features:

• High performances in a lightweight and practical console 
• Transmitter unit with 5-speed dual axis joysticks, 2 selectors and 2 push buttons 
• Dynamically assigned output relays and programmable special functions 

General features:

• Operating temperature: -45°+80°C 
• Hamming distance: >4 ID codes: over 4,1 billions (32 bit) Enclosures: Nylon + glass fiber (IP65 equivalent) 

Transmitter technical features: 

• LxWxH: 230x 95 x110 mm 
• Weight: 850 9 (without batteries) 
• Power supply: 4 AA-size batteries 
• Output power: <4mW 
• Max. current consumption: 10mA 
• Standby current: less than 1 pA Jammed button detection Low battery Indicator Start key switch and stop mushroom button 

Receiver technical features:

• LxWxH: 253 x267 x 150 mm 
• Weight: 2400 g (without cable) 
• Power supply:12/24 Vac/dc - 48/110/220 Vac 
• Current consumption at 24 Vac/dc: 32 mA in standby mode 148 mA with start relay activated + 19 mA more for each relay 
• Output contacts: 250Vac - 10A 
• Insulation voltage: 15 KV 

Product Details:

Under your commands:

• THOR X is able to offer customers a highly competitive choice for that special applications demanding for fingertip operation joysticks. Both single and dual axis joystick types can be mixed on the same dashboard allowing the benefits of an optimal control ergonomics.

Start Selector:

• Command present on each transmitter unit M550, gives way to the use of the radio control after each interruption for safety reasons active or passive. The way it works is customizable according to your needs and give you the certainty to begin in the best way selettore start radiocomandojoystick mono assiale radiocomandoOptical uni & bi-axial Joystick
• Forget the high maintenance costs of traditional joystick sliding contacts !
• Thanks to modern technology-readable, single-axis joysticks all designed and produced for the series M550 will ensure a precision unmatched, able to create a feeling of tactile control of lifted objects that will continue throughout the life of your remote control.
• The range of solutions allows you to cover all your needs: stepless proportional joystick

Description:

• The M550 THOR Transmitters console has ample space for the layout of controls, while maintaining compactness and convenience of use 
• The series THOR broadly meets every requirement of controlling access through a console practical and well equipped. On / off, combined with proportional analog outputs, PWM, CANopen, bi-directional transmissions, special made to specifications and software, enable THOR to be employed in any sector. 

Features:

• Low battery control LED
• Start push button
• Safety key
• Removable battery 
• Category 4 sil 3 emergency push button
• The versatility of THOR allows any kind of configuration
• Proportional optical joystick
• Button and switches for each need

Product Details:

Features:

• Sturdiness is guaranteed by a watertight and shock-resistant enclosures 
• Modern design, pocket size and light weight (200g) - 
• Designed for mobile and industrial applications
• Programmable special functions 

General features:

• Frequency: FM 4330825/434.6875 Mhz 
• Radio module: 1-channel quartz oscillator 
• Operating temperature: -45+80°C 
• Operating distance: up to 100m 
• Hamming distance: >4 ID codes: over 4,1 billions (32-bit) Remote pairing of ID code 
• Enclosures: Nylon + glass fiber (IP65 equivalent) 

Transmitter technical features:

• LxWxH: 163 x 49 x 45 mm 
• Weight: 200 g (without batteries) 
• Power supply: 2 AA-size batteries 
• Output power: <4mW 
• Max. current consumption: 10mA 
• Standby current less than 1 RA Jammed button detection Low battery indicator 
• Start key switch and stop mushroom button 

IReceiver technical features:

• LxWxH: 167x 154x 88mm 
• Weight: 1400 g (without cable) 
• Power supply: 12/24 Vac/dc - 48/220 Vac Current consumption at 24 Vac/dc: 31 mA in standby mode 128mA with start relay activated + 16mA more for each relay 
• Output contacts: 250Vac - 10A 
• Insulation Voltage 15 KV

Product Details:

Also for Wave S, WAVE L focuses on ergonomics with a transmitter shaped according to the application needs: 25mm diameter motion buttons enabling easy use when wearing industrial gloves, mushroom head STOP button protected from falls.

In addition, with M550D WAVE L10, are enables top level features. In fact this model is equipped with a LCD screen (two 8 character lines) for displaying machine feedback information.
 
WAVE L is ideal for overhead cranes equipped with second hoist, grab,electromagnets, medium size tower cranes, etc. WAVE L transmitters are available with 10 and 12 double pressure motion buttons, they all feature a Start/Horn button, a mushroom head Stop button and removable "contactless" safety key for restricted operation as standard. Room for an optional rotary switch, push button, toggle switch or potentiometer is available.

Features:

• Start pushbutton
• Battery level LED
• Extractable battery 
• Personalize stickers buttons
• Stop pushbutton category 4 sil 3
• Extractable safety key

Other Details:

• Start button Start to use the remote control after each interruption for safety reasons active or passive. The way it works is customizable to suit your needs
• Stop ButtonIn Category 4 (UNI EN954-1) - provides maximum protection with a design based largely on concepts of regular monitoring and redundancy processes.
• The button to self-restraint with manual reset is protected against accidental drops by 'ergonomic bumper yet is easily accessible allowing a management priority access
• Key removable "Contact Less"Allows use of' system only to authorized personnel. Plastic, and not subject to breakage, rust, etc.. equipped with magnetic drive for contact of the closure
• Led by StateAll units are equipped with transmitters LEDs for indicating the operating status of the battery charge level and coded messages

Product Details:

EN X, ESX, MID and MAX concepts was specially designed for ease of use. EN Series Remotes are mainly used in construction cranes,overhead travelling cranes and in different kinds of applications.

New series can be used in rolling plant, iron & steel, marble and many different industries. The remote body case is designed to stand impacts and harsh environment. Remote buttons are single & double step and can be used with gloves.

Product Details:

Transmitter Unit:

• L x W x H: 163 x 49 x 45 mm
• Weight: 250g (w/batteries)
• 2 AA size batteries
• Low power indicator.
• Rotary Key Switch can be replaced instead of Start Pushbutton (click here for image)

   Receiver Unit:

• L x W x H: 161 x 74 x 52 mm
• Weight: 1100g (w/out cable)
• Input Voltage: AC type: 24 / 48 / 110 / 220 /380V; DC type: 12 ~24V

 Specification:

• Frequency Control: Crystal
• Low power indicator
• Pushbutton jammed detector
• Shock resistance
• Function programmable