Gas Detector

Product Details:

Product Details:

Product Details:

We Emco Group India, India are the leading manufacturers, exporters and traders of brakes, inverters and crane cabinets. Our products are acknowledged for their supreme quality and reliability.

Product Details:

We Emco Group India, India are the leading manufacturers, exporters and traders of brakes, inverters and crane cabinets. Our products are acknowledged for their supreme quality and reliability.

Product Details:

The Single Gas Clip Plus (SGC Plus), is a maintenance free handheld gas detector with built in “Hibernate” mode for detecting hydrogen sulfide H2S or carbon monoxide CO. “Hibernate” mode allows users to place this disposable single gas detector in a rested state when not in use. The SGC Plus is perfect for seasonal/turnaround contractors or rental fleets. When your job or turnaround is finished, simply synchronize the instrument with our GCT IR Link or SGC Dock to put the detector in a rested state. When you are ready to use the detector again, simply press the power button to reactivate.

Use it when you need it.

• By hibernating the detector when not needed, you can spread 2 years of use over a 3 year period. This mode can only be enabled via IR communication with either the IR Link or SGC Dock. Only authorized personnel can place the detectors in “hibernate” mode.

Rugged and configurable.

The SGC Plus also provides the most advanced maintenance free disposable single gas detector on the market. The SGC Plus combines a rugged design with and reliability and advanced sensor resolution (0.1 ppm for H2S models). This detector allows for quick configuration adjustments to comply with current and future industrial health and safety gas exposure regulations.

• Unmatched sensor reliability for hydrogen sulfide (H???S) and carbon monoxide (CO)
• “Hibernate” mode
• Adjustable alarm set points
• Real-time gas reading capability
• 0.1 ppm resolution for H2S sensor and display
• Two-way IR communication for event downloads, bump tests, detector configuration and firmware updates
• Programmable unique 6 digit detector identification
• Bump Test notification and confirmation when intervals are set
• Calibration optional
• Calibration notification and confirmation when intervals are set
• Docking capability with Gas Clip Technologies SGC Dock

Product Details:

The battery -powered SenSmart 7000 wireless gas detector, with ultra-low power design and easy to use features, provides the most advanced, economical and reliable true wireless toxic and combustible gas detection solution. The SenSmart 7000 is compatible with all RC System’s toxic sensors, including hydrogen sulfide, carbon dioxide, oxygen, hydrogen cyanide and many others. In addition, the SenSmart 7000 also supports the new low-power infrared sensor for hydrocarbon combustibles or carbon dioxide.

Product Details:

The State-of-the-art SenSmart 6000 gas detector is built with our proven ‘ST-44’ transmitter. This versatile unit has a bright, vivid color display and embedded Ethernet with Webserver and Modbus TCP. The high performance, universal gas detector supports dual smart sensors with different type like Electrochemical, Catalytic Bead, Infrared and Photoionization sensors.

Features Highlight:

• CSA Certified for Class 1, Div 1 locations
• Vivid QVGA Backlit Color TFT Display
• Display Color Changes with Alarm Status
• Standard Ethernet Port with Web Server and Modbus TCP
• Dual Smart Sensor Capable
• Sensor Life Indication
• Remote Sensor Mount up to 4000
• Non-intrusive One-Man Calibration
• Temperature Compensation
• Two RS-485 Ports for Modbus
• 3 Programmable Relays and Fault Relay Available
• Heated elements available for low temperature

Product Details:

Field swappable sensor module. Range and target gas configured on sensor moduleImproves system noise immunity because low level sensor signals are protected within the sensor headIndustry standard 4-20mA signal may be transmitted thousands of feet on 2-wires316 SS model is suitable for Class 1 Div 1 hazardous areas.Missing or failed sensor forces <2mA FAULT signal Compatible with 1, 2, 4, 16 and 64 channel Receiver/Controllers (user calibration & readout are at the Receiver)2-wire milliamp signal is nonpolar with protective “steering diodes”SenSmart 1000 SeriesThe RC Systems SenSmart1100/1200/1300 are complete 2 or 3 wire Gas Detectors available in UL94 flame retardant plastic, or, Class 1 Div 1 316 stainless steel sensor head enclosures These easy-to-install and maintain gas detectors must be connected to an R. C. Systems single or multi-channel receiver to add user calibration and readout functions. (www.rcsystemsco.com/zoneprotector).SenSmart1100 utilizes our electrochemical temperature controlled SMART sensors to transmit O2, H2S, SO2, Cl2, HF, HCL, NO2 (to name a few) 2-wire 4-20mA gas values to R. C. Systems single and multi-channel receivers.The SenSmart1200 utilizes our “bridge” sensors, including catalytic, PID and infrared, to detect methane, propane, VOC’s, benzene, CO2 and many other compounds. The 1200’s bridge output is compatible with R. C. Systems single and multi-channel receivers.The SenSmart1300 has the same hardware as the 1100, but utilizes our ultra-low power infrared SMART sensors to detect carbon dioxide (CO2), methane, propane and other hydrocarbons. The 2-wire output (8-20mA) transmits gas values to R. C. Systems receivers.

Product Details:

Product Details:

Features & Highlights of the SenSmart 4100 EC

• Certification for Explosion Proof Class 1 Division 1 and Non Incendive Class 1 Division 2 Safe Installations
• Graphic display shows values, units, trend, bar graph, alarm levels
• Non-polarized 4-20mA loop powered interface eliminates wiring errors
• Two flashing Alarm LEDs with Programmable Alarm Levels
• Real time clock/ calendar flags alarm and calibration events
• Non-Intrusive, magnetic interface calibration sequence prompts the user through zero and span calibration. Span value is user programmable.
• Power-up and post-calibration delays eliminate false alarms
• Security settings to lock critical parameters Auto-recognition of Smart Sensors uploads calibration data and more
• Fault supervision circuitry detects failed sensor and transmits warning
• Setup in hazardous area requires only simple magnetic wand
• Sensor Life indication
• Available in non-metallic, cast aluminum or 316 stainless steel enclosures.

Product Details:

The SenSmart 2000 2-Wire 4-20mA Loop Powered Gas Monitor accepts oxygen and many toxic gases by offering a wide variety of electrochemical gas sensors. SenSmart 2000s utilize our popular “GEN 1 smart sensor” proprietary technology to provide sensor recognition and temperature compensation within the SenSmart 2000. Each GEN 1 smart sensor has its’ own non-volatile memory to store records of serial number, born-on date, initial calibration values, engineering units and temperature compensation algorithm Certified for Explosion Proof and Intrinsically

Product Details:

Addressable gas detectors GS-ADR.BC.V for detection of combustible, toxic and refrigerant gases.

• Catalytic gas sensors for combustible gases
• Electrochemical gas sensors for toxic gases
• Semiconductor gas sensors for refrigerant gases
• Digital RS485 output
• ATEX certified for use in Zone 1, 2, 21 and 21
• IP65 metal enclosure
• LED status indication
• Non intrusive calibration via external magnetic adapter without opening the instrument

Product Details:

We Emco Group India, India are the leading manufacturers, exporters and traders of brakes, inverters and crane cabinets. Our products are acknowledged for their supreme quality and reliability.

Product Details: