New Items

• Radar-based distance measurement system operating at frequencies best suited and uniquely tuned for material handling conditions.

• Detection Range of 0.12 to 40 meters

• Distance measurement with +/- 2 millimeter accuracy

• Detection range is configurable

• Small 3dB beamwidth of approx. 8 deg

• 3 configurable outputs for control

• Risetime 220 msec

• Remote upgradable and remote tuning capable

Enclosure Options

• Available in a NEMA 4X/IP66 Plastic or Class II Div I explosion proof enclosures

Connectivity Options??? ???

• HAL Embedded Cellular (standard)

  • LTE, CAT M, NBIOT, 2G, 3G

  • Direct connection from sensor to cloud

  • Data plans available

• 900 MHz, SigFox, LoRa, Wi-Fi and other protocols available on request

• Direct Connection Available???

Power Options???

• 7-28v power input

• Battery with solar charge

Additional Sensor Options???

• Virtually limitless, just ask

Sensing levels of solids or liquids in your bins, silos or tanks is finally affordable, highly accurate  and scalable. Because our sensor is based and built on an industrial Internet of Things platform, you can manage your sensors, inventories and supply chain from and to anywhere in the world.

Not affected by airborne particles, dust or buildup on sensor

Durable non-contact radar technology that can sense levels down to 40 meters with millimeter accuracy

Cloud, App and connectivity options, or bring your own.

Remote configuration and data presentation from anywhere in the world  

The radar measures the distance of multiple points and filters out any unwanted measurements. The sensor then calculates the mean of desired measurements (product in vessel) and creates a percentage of full or empty of the silo or weight of the material based on the size and volume of the vessel.

WIRELESS

Internet of Things focused with a variety of connectivity options

SIMPLE SETUP

Designed for ease of installation and compatible with most cloud applications

Power

A number of power options for energy efficiency and ease of installation

SUPERIOR DESIGN

Simple solid state design with options for up to Class 2 Div 1 enclosures

Remote

Remote configuration and ability to view data from anywhere

HIGHLY CONFIGURABLE

Over 100 additional sensor options, please contact us for custom applications

Non Contact Radar 

???Enclosure options

• Explosion Proof (C1/D1) aluminum enclosure

• Industrial NEMA 4X/IP66 Rugged Plastic

• Low cost IP67 

Over 100 sensor options:

• CO2/CO/NO/VOC

• Humidity

• Temp

• Smoke

• Pressure

110v or solar/battery power

Easy and low cost cellular to cloud and other connectivity options

• Cellular (LTE, CATM, NBIOT, 2G, 3G)

• LoRa

• SigFox

• 900 MHz

• ZigBee

• Measurement range
  • -20 to 60???dp
• Accuracy
  • (dp) ±0.3dp T±0.2
• Output
  • 4-20mA,or 0-20mA

HAL Radar Level Sensor for Ex, Atex Explosion Proof Storage Areas.

Measure Level of Solids and Liquids with Non Contact Radar Levels Sensors in Dusty Areas.

Indoor/Outdoor device for hazardous environments.

???

Enclosure Ratings

• FM: Dust ignition-proof for Class II/III, Division 1, Groups E, F and G, hazardous (classified) locations, indoors and outdoors (Type 4X/IP66)

• CSA: Dust ignition-proof for Class II/III, Division 1, Groups E, F and G, hazardous (classified) locations, indoors and outdoors (Type 4X/IP66)

• ATEX: II 2 G D, Ex d IIC, Ex tD A21, IP68, 

• IEC EX: Ex d IIC, Ex A21 tD, IP68

Wherever masses can collide, the occurring forces must be reliably damped by buffers. A typical application area for P + S bumpers made of cellular Diepocell, which have an excellent damping capacity and a large working capacity. Due to different qualities of the high-performance material Diepocell, buffers which are hydrolysis-resistant can also be supplied for use in subtropical / tropical climates, as well as for applications with increased humidity.

Our proven buffer components are preferably used in general mechanical engineering as well as in crane construction. The stop buffers of our standard program are available either with central mounting, with two threaded bolts or with a square base plate in different designs.

In the area of special constructions, in special installation situations, in difficult environmental influences or large loads, we develop buffers / buffer elements, which are specially designed for just these factors.

In the field of crane construction and crane technology, polyurethane hot-cast elastomers have to fulfill a large number of requirements. Large forces, compact designs, high speeds under load, and the demand for products for global use - these are the requirements that moulded parts made by P+S are faced with day by day.

Diepocell^® crane buffers are characterized by an excellent damping behaviour - and at the same time very volume-compressible - a great advantage in installation situations with limited space. Further development of this material can also be used in tropical climates and is characterized especially by being stable to aging by hydrolysis.

Heavy-duty wheels and castors from Diepothan^® cover constant change of direction under full load at high speeds on cable wagons in world-wide crane applications or in large goods lifts.
Smallest limit switches made of Vulkocell^® in chain hoists or large bumpers of 600x900mm with steel plate and crash protection - our products home is the global crane industry, crane technology and lifting equipment of all kinds.

In-house conveyor technology includes conveyor systems and handling systems for goods transport by simple forklifts up to fully automated storage and dispatching systems. This includes not only conveyor lines but also automatic production lines. Such systems have to have following properties: faster, more efficient and careful transport of goods - for optimal processes both in production and in your logistics concept.

Applications made of our high-performance hot-cast elastomers will be developed fitting perfect to the conveying concept and the goods to be transported.

Rollers for material handling vehicles, but also complex roll systems in automated high-bay warehouses and goods issue systems - we do support you by developing solutions for your concept by the knowledge of our engineering department and our outstanding high-performance elastomers. Stops, sliding elements, guide rails and guide rollers, dampers and bumpers and many other moulded parts made of polyurethane protect even sensitive products such as glass during in-house transport, as well as on the road.